Hello everyone!

You may have seen the brief tutorial which we posted previously about putting the Dollfie Plus heads on an EB-Beauty series doll.

Since we have received questions, and requests for more detailed information, we decided to post a step-by-step tutorial to help you!

Not only is this the method to use for the EB-Beauty bodies which come with an open eyed head, this is also the method you will use when putting the Dollfie Plus heads on an EB-Beauty series doll. (Any other EB series doll has a different neck mechanism, so these steps will not be necessary.)

Step 1: Your Materials

Step 2: The Neck Post

This step is only being included to show you what the neck post looks like before you do anything to it. This post works well for the soft vinyl heads, but needs extra steps before we can put on the open eyed head.

Step 3: The 2mm Ring

First you will put the 2mm ring of vinyl tubing onto the post. Push it down as far as it will go, until it rests inside the neck.

Step 4: Put On The Head

Now, place the head onto the neck, on top of the 2mm ring which you already put on.

Step 5: The 3mm Ring

Place the 3mm ring on the post and push it on tightly. The head should now be cushioned in between the 2mm ring, and the 3mm ring.

Step 6: Compress the 3mm Ring

This next part is tricky. The clear vinyl is soft, so it can be compressed somewhat. Push down on the 3mm ring and expose the indent on the neck post.

Step 7: Place the "C" Stopper

While you are exposing the indent, take your “C” Stopper, and place it in the indent as shown. If you can’t get it with your fingers you can use tweezers to press the Stopper into place. It may be easier to get it partially into place, and then press it down gradually until all of the Stopper is resting in the indent.

Once you finish this last step all you need to do is put the back of the head in place and you are done!

I hope that this was helpful for you!

If you have any questions, or if there is a tutorial that you would like to see here on Sumika Times please email us at service@volksusa.com!

This entry was posted on Sunday, June 28th, 2009 at 12:11 pm and is filed under Dollfie, Tutorials. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.